DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State Or Tribe, consult the State or Tribal agency responsible for pesticide regulation.
1. TEST WATER
Take a water sample to your Authorized SPARCO Dealer for testing. Treat water to remove materials and debris.
2. VACUUM AND BALANCE
Once debris completely settles, vacuum pool bottom, thoroughly clean filter, then balance pool water as follows:
Calcium Hardness: 350 ppm (min)
pH: 7.2 – 7.6
Total Alkalinity: 80 – 120 ppm
3. POOL WATER MANAGER DAY
NOTE: At the beginning of each season, and for all new pools, a double-dose is required on the initial application to “charge” the water.
Add POOL WATER MANAGER to pool water according to dosage chart, preferably near a return jet, and add sanitizer in accordance with product directions to skimmer, feeder or floater to maintain desired level.
Chlorine Generators (salt): Add stabilizer to maintain 50 ppm and adjust generator setting accordingly.
WEEKLY: Repeat POOL WATER MANAGER DAY
MONTHLY: Take a water sample to your Authorized SPARCO Dealer for testing.
ABOVE GROUND POOLS NOTE: Fill scoop to “fill line.”
(equals approximately one-half pound)