$43.99
BioGuard SoftSwim C is a powerful clarifier and oxidizer that is the 3rd step in the SoftSwim Non-Chlorine pool chemical system. This is a unique, patented formulation for use in the BioGuard SoftSwim Program. Regular use keeps pool water clear and sparkling. It should not be used in pools that are on a chlorine or bromine treatment program. This product is not a sanitizer or algaecide. The BioGuard SoftSwim Program is ideal for pools containing less than 25,000 gallons of water, in-ground or above-ground pools, pools with excellent circulation and a pump that operates at least 12 hours per day, pools with a bottom drain, and any surface type, but especially great for all vinyl-lined pools.
In stock
Brand: BioGuard, SoftSwim
Use SoftSwim C on a monthly basis to maintain clarity. This powerful clarifier and oxidizer helps you keep the sparkle in your water longer by removing contaminants that can cause cloudiness.
Initial Start Up:
1 gallon per 10,000 gallons of water.
Routine Maintenance:
1 gallon per 10,000 gallons of water per month.
Cloudy Water Treatment:
2 gallons per 10,000 gallons of water.
Winterizing:
1 gallon per 10,000 gallons of water.
Start-Up:
Before opening your pool for the season, take a sample of your pool water to your BioGuard Authorized Dealer for a complete water analysis. Once your pool water has been properly balanced, add SoftSwim A according to label directions. Add one gallon of SoftSwim C per 10,000 gallons of pool water. Allow the water to circulate for 24 hours. Then adjust the SoftSwim B to 50 ppm. Resume routine maintenance as instructed by the SoftSwim Pool Care Guide.
Routine Maintenance:
Once each month, add SoftSwim C at a rate of 1 gallon per 10,000 gallons of pool water to maintain sparkling clear water. With the filter operating, pour SoftSwim C directly into the water in several areas of the pool. Allow treatment to circulate throughout the pool for at least 30 minutes before swimming. (Note: Excessive rain, high temperatures or heavy bather loads may require more frequent additions of SoftSwim C (consult your SoftSwim Dealer for additional details.)
Clearing Cloudy Water:
Improperly cleaned filters are the primary cause of cloudy water in SoftSwim pools. Clean filter with SoftSwim Filter Cleaner following label directions. (Note: For best results, filters should be cleaned every 6 weeks) Add SoftSwim C at a rate of two gallons per 10,000 gallons of pool water. Use BioGuard SoftSwim Filter Aid to enhance clearing of cloudy water. If the condition persists, take a sample of your pool water to you BioGuard Authorized Dealer for further recommendations.
Winterizing:
To winterize your pool, simply add SoftSwim A and SoftSwim B according to label directions and add 1 gallon of SoftSwim C per 10,000 gallons.
| Weight | 20 lbs |
|---|---|
| Size | 1 case – 2 gal |
Free Shipping on all Orders over $100! Dismiss
