BioGuard Scale Inhibitor


  • Protects pool equipment from scale build-up and metal stains
  • Prevents and removes metal stains and scale on pool surfaces
  • Prevents cloudy water due to high calcium level
  • For chlorine- or bromine-treated pools

SKU: 1004637 Category: Tag:

Product Dosage

Initial Treatment:
32 fl oz per 10,000 gallons of water.

Maintenance Treatment:
16 fl oz per 10,000 gallons of water per month.

Removal of Fresh Stains:
32 fl oz per 10,000 gallons of water.


Initial Treatment:
Backwash filter according to manufacturers directions. With the pump running add 1 quart of this product per 10,000 gallons of water, pouring product directly into the pool. Continue to run pump for 24 to 48 hours after this addition.

Maintenance Treatment:
For the maintenance dose, apply 16 fl. oz. of this product per 10,000 gallons of pool water once a month. Add product directly to pool water with pump on. Maintenance doses should be used for pools in areas where excessive hardness or metals cause constant scale and staining problems.

Fresh Stain Removal:
Many fresh (less than 5 days old) metallic stains can be removed by this product. Add this product at a rate of 1 quart per 10,000 gallons of water. Apply directly to the pool in the area of the stains. Brush the stained area daily for 3 to 5 days. Large metal stains may require repeat treatments. Where metal stains have aged into the pools surface, draining and acid washing is recommended for white plaster pools only. Consult your BioGuard dealer regarding this matter.

Additional Information

Weight 2.45 lbs

1 qt